BLACK WEIGHT POCKET 2.3 KG UNIT

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

221 DC3 REGULATOR DIN

Built with the same quality as the DC1, without the swivel turret, the DC3 is the ideal 1st stage for double cylinder configuration as well as perfect for single cylinders. Paired with the 221 which uses the same technology as the 212 without the dynamic adjustment. This reg set is designed for those who believe keeping it simple is best.

0,8 L ALUMINIUM ARGON CYLINDER W/ M25 VALVE

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

ACCESSORIES POCKET BLACK

Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.

210 HO2 REGULATOR OXYGEN DIN

The 210/O2 + HO2 Tech Regulator features a bulletproof design, certified for up to 100% oxygen service thanks to highly specialized component materials and manufacturing processes.

XTREM KANGAROO SMALL HANDBAG

The TDS Xtrem Kangaroo pocket is a pocket specially designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed to the smallest detail to offer maximum performance to the technical diver.

M26 OXYGEN VALVE 232 B

Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.

A700 SECOND STAGE

Integrating air-balanced valve technology, the A700 brings you extraordinary breathing performance in a striking, precision-handcrafted, full-metal package. Whatever your dive destination, the SCUBAPRO A700 lets you breathe effortlessly and naturally underwater for a lifetime of exceptional dive experiences.

M25X2 VALVE 232 B BLACK

M 25x2 cylinder therad and EN144-1. Standard Yoke Outlet with a Spin-Out Threaded DIN Adapter. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

G260 SECOND STAGE

The G260 is a new balanced adjustable second stage featuring metal components for excellent cold water resistance (inlet tube, orifice, inhalation control knob and hose connector).

TRIM WEIGHT POCKET

Designed to be mounted on 2 inch webbing, vertically or horizontally. Can be used on nylon tank bands to augment the divers trim.

S600 SECOND STAGE

A second stage regulator must translate natural breathing behaviour into mechanical reality. A high quality second stage can significantly reduce stress and enhance diver safety by providing smooth, low-effort breathing response, resulting in ample yet controllable quantities of air.The designation balanced and classic downstream are also distinguishing marks for second stages and again imply ultimate flow performance and stability in addition to reliability, simplicity and solid performance.

TWIN RIGHT VALVE M25 232 BAR WITHOUT CAP

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.

ARMADILLO BACK PAD

Additional rear part of backplate for attaching the sidemount bottles.Material: Cordura 1100, webbing, stainless-steel AISI 316. Weight: 0,28 kg

REGULATOR NECK BAND

Elastic rubber band for fixing the emergency regulator to the neck. Easy to locate and can even keep the second stage fixed to the mouth in an emergency situation.

M25 TWIN RIGHT VALVE WO/ CAP 232 B

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.

ADITIONAL POCKET

Additional pocket for backplate ballast system or belt. Dimensions 18x15x4 cm

TWIN RIGHT VALVE BLACK M25 232 BAR WITHOUT CAP

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

OXYGEN 1st STAGE FOR APD REBREATHER

AP Diving first stage for oxygen , made with a new design. It is special for this brand rebreathers and is riding standard. Connection DIN 300 M25. Green indicator for Oxygen

BACK PLATE POCKET

Designed for placing a buoy or a lifting bag between the backplate and diver´s back. Stainless-steel screws for attaching the pocket to the backplate are included.

TWIN LEFT VALVE BLACK M25 232 BAR WITHOUT CAP

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

OXYGEN 1st STAGE M26 FOR APD REBREATHER

AP Diving first stage for oxygen , made with a new design. It is special for this brand rebreathers and is included as standard. Connection DIN 300 M26. Green indicator for Oxygen